To
install the ball for use make sure the nut is all the way against the shoulder
above the threads. Drop the shank through the hole. Turn the ball to the right.
Lift into the notch and turn the nut to the right until it holds the ball up
tight. Then take a BIG HAMMER and tighten the nut to the right.
Don’t be shy, this ball must stay tight while pulling your
property down the road. (With practice this can be done in 7 or 8 seconds.)
To
remove the ball, reverse the nut all the way left to the shoulder above it. Turn
the ball left & lift out.
The
cover furnished with the hitch works just like a thermos bottle stopper,
adjustable with the wing nut to suit the need.
At
this time QUICK HITCH is available for all models large enough to pull gooseneck
trailers in G.M., Ford and Dodge
including the 2001 versions.
Models
not listed above use different parts and slightly different methods than those
described.
